Clock Movement Advice

Dans Clock Shop stock a suitable replacement for most battery-operated movement brands. If you require a replacement movement for an existing clock and would like our advice on which item to purchase, please fill in the information below to help us guide you to the correct movement.

How to measure a clock shaft

To measure the shaft length, you will need to remove the clock movement from the clock. The shaft length is measured from the back of the movement to the tip of the shaft. If you are unsure about how to measure the shaft length, please refer to the images below.

Click to enlarge

Clock Movement Advice Form

Please fill in the form below with as much information as possible. This will help us to provide you with the best advice for your clock movement replacement.

Important Information:

To be able to input the correct information below, the clock movement would need to be removed from the clock first, before the measurements are taken.

* Required fields.

First Name *

Last Name *

Email Address *

Contact Number *

Movement total shaft length (mm) *

Movement shaft thread length (mm) (if applicable) *

Movement brand information (from the back of the movement) *

Movement Type (ticking, non-ticking, silent)

Minute hand measurement (mm) - centre of the fitting hole to the tip *

Are new hands required? *

Please attach clear images below to help us advise on the most suitable movement

1. Movement shaft from a side view without hands attached *

2. Back of the clock movement *

3. Clock hands

Additional information