New Replacement Quartz Clock Kit - Movement With Metal Hands And Fittings

£8.99

In Stock

ORDER INFORMATION 1. Remove your old clock movement, this is normally held in place by a hex nut which can be unscrewed once the hands have been removed. If the movement does not have a thread please contact us at hello@dansclockshop.com for further help. 2. Measure the length of the gold thread and match to the drop down box below. 3. Decide if you prefer a ticking or quieter non ticking sweep movement 4. The Movements do have a built in plastic hanger but this can be removed if you prefer. This can leave a slight scratch to the top of the movement but will not affect the performance. 5. Measure the length of your minute hand from the centre of the hand hole to the tip of the hand and match to the hand size on the listing. Each hand size we stock is only available in one style

Qty
+ -

We are a UK business and all our items ship wordwide from the UK.

  • Available in 5 shaft sizes 
  • Ticking  - Standard ticking 
  • Non ticking - Second hand sweeps rather than ticks for a quieter movement
  • Movement dimensions - height 70mm ( 55mm with hanger removed ) - width 55mm - depth 16mm
  • All movements have a 7.6mm gold thread width
  • Press fit metal hands in sizes 24mm - 130mm ( Please select above ).Hand measurement shown is taken from the centre of the minute hand hole to the tip of the minute hand
  • Complete with all fixings
  • ROHS approved
  • Fully tested
  • Fitting instructions included